Skip to content

Classic spirit. New possibilities.

Planning and Development

1971 VW Smart Camper: Project 360

Transforming a classic Volkswagen Bay Window Bus into a modern off-grid adventure camper using custom electronics, Raspberry Pi, AI technology, 3D printing, digital instruments, security systems, and cameras.

The project roadmap

Build systems & progress

Expand each category to explore the plan. Status labels describe documented progress, not live hardware activity.

Progress vocabulary

  • Planned
  • Researching
  • Parts Ordered
  • In Development
  • Testing
  • Installed
  • Completed
01

Smart Dashboard

Planned

A modern instrument workspace inside a classic cabin.

  • Raspberry Pi 5, planned 16GB RAM
  • Raspberry Pi Touch Display 2
  • Raspberry Pi OS 64-bit
  • Two ESP32-S3 round digital gauges
  • Digital GPS compass and altitude display
  • External EEPROM for saved settings
  • Bluetooth connectivity
  • Future integration investigation for 123ignition
  • Custom curved overhead console designed in CAD
  • 3D-printed components with concealed metal supports and snap-on screw covers

Planned specifications; component fit, compatibility and 123ignition integration still need investigation.

02

AI Camera System

Planned

A planned six-camera surround-view concept using overlapping fields of view around the bus.

Coverage strategy:

The six-camera design uses overlapping views rather than isolated forward, side, and rear cones. Front and rear corner cameras are angled diagonally, while the side cameras cover both forward-side and rear-side zones. This layout is intended to reduce blind spots and improve full-perimeter visibility for driving, parking, security, and wildlife monitoring.

Top-down VW bus surround-view concept with six labeled cameras and overlapping semi-transparent coverage zones around the vehicle perimeter.
Proposed camera positions and overlapping view strategy. Shapes are illustrative rather than measured fields of view; final blind spots, range and overlap depend on hardware and mounting tests.
  1. Front left
  2. Front right
  3. Driver side
  4. Passenger side
  5. Rear left
  6. Rear right

Planned camera system

  • Six-camera surround-view concept
  • Near-360° overlapping coverage
  • Driving dashcam recording
  • Parked security monitoring
  • Wildlife observation support
  • Infrared night operation planned
  • Raspberry Pi AI HAT+ 26 TOPS planned
  • 1TB storage planned
  • Final camera hardware and lens selection still under evaluation

Near-360° overlapping coverage is a design goal, not perfect or guaranteed 360° visibility. Final results depend on camera hardware, lens choice, mounting angle and real-world testing.

03

Smart Security

Planned

Visual and tactile alerts for time at camp and time away from the bus.

  • Body-contact/proximity monitoring
  • Impact and door sensors
  • Parked Away Security mode
  • Camping Security mode
  • Infrared wildlife monitoring
  • Flashing interior LED alerts
  • Vibrating bed wake-up alert
  • Optional manually activated outdoor voice warning
  • Local camera recordings

Cellular security concept

Cellular SMS Security Alerts

Planned

The DUN360 Smart Camper will use Raspberry Pi 5, ESP32-S3 security sensors, and a 4G LTE cellular connection to send text-message notifications to the owner's phone.

Alert threshold

Minor contact should not automatically generate a full theft alarm.

Planned alert triggers

Planned
  • Unauthorized door opening while Away Security is armed
  • Strong impact against the VW body
  • Repeated suspicious body-contact or proximity events
  • Possible vehicle movement while parked and security is armed, using future verified GPS/movement detection
  • Security alarm activation
  • Optional low-battery and system-health notifications

Planned capabilities

Planned
  • Automatic SMS alerts
  • GPS location in supported alerts
  • Six-camera event recording
  • Security event history
  • Away Security and Camping Security modes
  • Adjustable notification preferences
  • Arming and disarming delay
  • False-alarm filtering and notification rate limits
  • Alert delivery and failure status
  • Optional backup power for security monitoring

Technical architecture

Planned
  • ESP32-S3 handles sensor monitoring
  • Raspberry Pi 5 processes security events
  • A compatible 4G LTE modem sends SMS through an SMS-enabled cellular subscription
  • The AI HAT+ 26 TOPS assists with camera-based recognition
  • The 1TB NVMe system stores footage and event history
  • The external cellular antenna and power connections require weatherproof, automotive-safe installation

Cellular security shopping list

Planned
  • 4G LTE modem supporting SMS
  • Compatible SIM card and cellular subscription
  • LTE antenna
  • USB connectivity and power components
  • Optional protected backup power

Example candidate: Waveshare SIM7600G-H is an example candidate only, not a confirmed purchase.

No tilt sensor is currently planned. Security and wildlife detection are experimental design goals, not certified or guaranteed protection.

04

Camper Automation

Planned

Everyday camper controls with independent physical switches.

  • Interior and exterior camper lighting
  • LED strip controls and brightness
  • ESP32-controlled electronics
  • Independent physical lighting switches
  • Motorized 12V windshield blackout roller
  • Touchscreen UP / STOP / DOWN interface
  • Vehicle safety interlocks
  • Protected automotive electrical circuits

Lighting concept

Smart LED Lighting & Automation

Planned

Project visionThe 1971 VW Smart Camper will feature multiple individually controlled LED strips with custom animations, automatic door-triggered lighting, and a central Raspberry Pi touchscreen.

Animated door lighting

Planned
  • Sliding door opens: LED waterfall/chasing animation activates
  • Driver door opens: Driver-side welcome lighting activates
  • Passenger door opens: Passenger-side welcome lighting activates
  • Rear hatch opens: Rear cargo lighting activates
  • Smooth fade-in and fade-out effects
  • Adjustable brightness and animation speed

Multiple LED zones

Planned
  • Front cabin
  • Ceiling perimeter
  • Sliding-door entrance
  • Kitchen area
  • Sleeping area
  • Rear cargo area
  • Exterior campsite lighting
  • Underbody accent lighting, subject to vehicle lighting regulations

Raspberry Pi touchscreen control

Planned
  • Individual LED zone ON/OFF controls
  • Brightness adjustment
  • Colour selection for compatible RGB strips
  • Animation selection
  • Day and night presets
  • Camping mode
  • All Lights OFF
  • Custom saved lighting scenes

Electronics architecture

Planned
  • Raspberry Pi 5: Main touchscreen and automation interface
  • ESP32-S3: Addressable LED animations and sensor handling
  • Door-contact sensors: Trigger welcome-light sequences
  • External EEPROM: Store selected settings where appropriate
  • Protected power distribution and correctly rated switching
  • Independent manual lighting controls

Essential control continuityThe ESP32 should continue to operate essential lighting controls when the Raspberry Pi is unavailable.

Planned prototype · No hardware connection

Lighting control dashboard concept

Planned
Zone 01
Front cabin

Preview on

Zone 02
Ceiling perimeter

Preview on

Zone 03
Sliding-door entrance

Preview on

Zone 04
Kitchen area

Preview off

Zone 05
Sleeping area

Preview off

Zone 06
Rear cargo area

Preview off

Zone 07
Exterior campsite lighting

Preview off

Zone 08
Underbody accent lighting, subject to vehicle lighting regulations

Preview off

Animation examples
WaterfallChasingBreathingFadeStatic light
All Lights OFF

This is a static interface concept for planning only. It does not communicate with a Raspberry Pi, ESP32, sensors, lights, or vehicle systems.

Project shopping list

Planned
  • Addressable RGB LED strips
  • ESP32-S3 LED controllers
  • Door-contact sensors
  • Suitable LED power converters
  • Fuses and protected wiring
  • LED strip mounting channels
  • Diffusers
  • Connectors and spare parts

Quantities and electrical specifications will be determined after CAD measurements and power calculations.

Controls are concepts only. Vehicle interlocks and electrical protection require design review and testing before use. No live controls or hardware connections are provided here.

05

CAD and 3D Printing

Planned

A modular overhead console, designed for fit, heat, vibration, and service access.

  • Full-width curved ceiling dashboard
  • Aluminum support rail
  • Hidden fasteners
  • Removable snap-on covers
  • Custom camera enclosures
  • TPU gaskets and anti-vibration components
  • Heat-resistant printing materials
  • Removable modules for maintenance
CAD drawingsAwaiting real build material
Printed prototypesAwaiting real build material
Build photographsAwaiting real build material
06

DUN360 Adventures & Videos

Planned

Documenting the restoration, the technology, and the adventures ahead.

  • TikTok LIVE while traveling
  • YouTube travel and restoration vlogs
  • Wildlife video footage
  • Scenic driving recordings
  • Camper technology tutorials
  • Embedded YouTube videos on DUN360
  • Future livestream announcements

YouTube Account link to come

TikTok Account link to come

Video embeds and livestream announcements will appear here when footage, schedules and account links are available.

Equipment notebook

Project parts list

A working equipment plan. Quantities are planned, not an inventory. “Not confirmed” means no purchase has been documented; TBD quantities are still to be decided.

Raspberry Pi and AI3 entries
Raspberry Pi and AI — planned equipment
EquipmentPlanned qty.Purchase status
Raspberry Pi 5 — planned 16GB RAM1Not confirmed
Raspberry Pi Touch Display 21Not confirmed
Raspberry Pi AI HAT+ — 26 TOPS1Not confirmed
Cameras and infrared3 entries
Cameras and infrared — planned equipment
EquipmentPlanned qty.Purchase status
Camera modules — six planned viewpoints6Not confirmed
Infrared camera / illumination hardwareTBDNot confirmed
Camera cabling and interfacesTBDNot confirmed
ESP32 and digital gauges3 entries
ESP32 and digital gauges — planned equipment
EquipmentPlanned qty.Purchase status
ESP32-S3 round digital gauges2Not confirmed
GPS compass and altitude hardwareTBDNot confirmed
External EEPROM for saved settingsTBDNot confirmed
Security sensors10 entries
Security sensors — planned equipment
EquipmentPlanned qty.Purchase status
Body-contact/proximity sensorsTBDNot confirmed
Impact sensorsTBDNot confirmed
Door sensorsTBDNot confirmed
Vibrating bed alert hardwareTBDNot confirmed
Optional manually activated outdoor voice warning hardwareTBDNot confirmed
4G LTE modem supporting SMS — Waveshare SIM7600G-H example candidateTBDNot confirmed
Compatible SIM card and cellular subscriptionTBDNot confirmed
LTE antennaTBDNot confirmed
USB connectivity and power componentsTBDNot confirmed
Optional protected backup powerTBDNot confirmed
Lighting and automation11 entries
Lighting and automation — planned equipment
EquipmentPlanned qty.Purchase status
Addressable RGB LED stripsTBDNot confirmed
ESP32-S3 LED controllersTBDNot confirmed
Door-contact sensorsTBDNot confirmed
Suitable LED power convertersTBDNot confirmed
Fuses and protected wiringTBDNot confirmed
LED strip mounting channelsTBDNot confirmed
DiffusersTBDNot confirmed
Connectors and spare partsTBDNot confirmed
Independent physical lighting switchesTBDNot confirmed
Motorized 12V windshield blackout roller1Not confirmed
Vehicle safety interlock componentsTBDNot confirmed
Storage and power3 entries
Storage and power — planned equipment
EquipmentPlanned qty.Purchase status
1TB NVMe recording storage1Not confirmed
NVMe interface / expansion hardwareTBDNot confirmed
Protected automotive power supply and circuit protectionTBDNot confirmed
CAD and 3D printing6 entries
CAD and 3D printing — planned equipment
EquipmentPlanned qty.Purchase status
Aluminum support railTBDNot confirmed
Concealed metal supports and fastenersTBDNot confirmed
Snap-on covers and removable modulesTBDNot confirmed
Custom camera enclosuresTBDNot confirmed
TPU gaskets and anti-vibration componentsTBDNot confirmed
Heat-resistant printing materialsTBDNot confirmed

From concept to installation

Build field notes

Progress updates to come

Future entries will document design decisions, parts received, prototypes, testing and installation as they happen. No completed build milestones have been documented yet.